show interfaces smartrate

Syntax

show interfaces <PORT-LIST> smartrate

Description

Displays Smart Rate diagnostic information.

Parameter

PORT-LIST

Specify a port number or a list of ports.

Examples

switch(config)#show interfaces A1 smartrate

 Status and Counters – Smart Rate information for Port A1

  Model                   : 0x03a1
  Chip                    : 0xb582
  Firmware                : 3.3.e
  Provisioning            : 0x0002

  Established link speed                 : 100BASE-T
  Number of attempts to establish link   : 1
  Uptime since link was established      : 30 seconds

  Local Port advertised capabilities
  100MBT  | 1.0GBT  | 2.5G NBT | 5.0G NBT | 2.5GBT | 5.0GBT | 10GBT
   Yes    |  No     |   No     |   No     |  No    |  No    |  No

  Link Partner advertised capabilities
  100MBT  | 1.0GBT  | 2.5G NBT | 5.0G NBT | 2.5GBT | 5.0GBT | 10GBT
   Yes    |  Yes    |   Yes    |   Yes    |  No    |  No    | Yes


switch(config)# show interface A2 smartrate

 Status and Counters – Smart Rate information for Port A2

  Model                   : 0x03a1
  Chip                    : 0xb582
  Firmware                : 3.3.e
  Provisioning            : 0x0002

  Established link speed                 : 100BASE-T
  Number of attempts to establish link   : 1
  Uptime since link was established      : 30 seconds

  Local Port advertised capabilities
  100MBT  | 1.0GBT  | 2.5G NBT | 5.0G NBT | 2.5GBT | 5.0GBT | 10GBT
   Yes    |  Yes    |   Yes    |   Yes    |  Yes   |  Yes   |  Yes

  Link Partner advertised capabilities
  100MBT  | 1.0GBT  | 2.5G NBT | 5.0G NBT | 2.5GBT | 5.0GBT | 10GBT
   Yes    |  No     |   No     |   No     |  No    |  No    |  N0