Re-enabling a port manually

Syntax:


no spanning-tree bpdu-protection-timeout timeout

Configures the duration of time protected ports remain disabled. The default value of 0 sets an infinite timeout, so ports that are disabled are not re-enabled automatically.

NOTE:

This is a GLOBAL command.

Range: 0 - 65535 seconds

Default: 0

You can also set the timeout in the MIB with this MIB object: hpSwitchStpBpduProtectionTimeout

It is also possible to use the following automatic re-enable timer command:

switch(config)# spanning-tree bpdu-protection-timeout 120