Viewing static port (and trunk) ACL assignments

This command lists the identification and types of current static port ACL assignments to individual switch ports and trunks, as configured in the running-config file. The switch allows one static port ACL assignment per port.

Syntax:


show access-list ports <all|interface>

Lists the current static port ACL assignments for ports and trunks in the running config file.

NOTE:

This information also appears in the show running output. If you execute write memory after configuring an ACL, it also appears in the show config output.

For example, if you assigned a standard ACL with an ACL-ID of “Port-10” to filter inbound IP traffic on switch ports B10-B11 and trunk trk1, you could verify these assignments as shown in Listing the ACL assignments for ports and trunks.

Listing the ACL assignments for ports and trunks