aruba-central support-mode

Syntax

aruba-central support-mode

Description

Enter support mode to enable all configuration commands. Normally, when the system is connected to an Aruba Central server, the configuration is updated from that server and most local configuration commands are disabled. Support mode enables those commands for use in troubleshooting problems. Support mode is disabled by default. When the system is not connected to Aruba Central server, the full command set is enabled for local configuration.

Usage

aruba-central support-mode {enable | disable}

Example

switch(config)# aruba-central support-mode enable

This mode will enable all CLI configuration commands, including those normally reserved by the Aruba Central
service. 
Use of this mode may invalidate the configuration provisioned through Aruba Central server.
Continue (y/n)?