Viewing the current TimeP configuration (CLI)

Using different show commands, you can display either the full TimeP configuration or a combined listing of all TimeP, SNTP, and VLAN IP addresses configured on the switch.

Syntax:


show timep

Lists both the time synchronization method (TimeP, SNTP, or None) and the TimeP configuration, even if SNTP is not the selected time protocol. (If the TimeP Mode is set to Disabled or DHCP, the Server field does not appear.)

If you configure the switch with TimeP as the time synchronization method, then enable TimeP in DHCP mode with the default poll interval, show timep lists the following:

TimeP configuration when TimeP is the selected Time synchronization method

switch(config)# show timep

 Timep Configuration

  Time Sync Mode: Timep
  TimeP Mode [Disabled] : DHCP    Server Address : 10.10.28.103
  Poll Interval (min) [720] : 720

If SNTP is the selected time synchronization method, show timep still lists the TimeP configuration even though it is not currently in use. Even though, in this Example:, SNTP is the current time synchronization method, the switch maintains the TimeP configuration:

TimeP configuration when TimeP is not the selected time synchronization method

switch(config)# show timep

 Timep Configuration
 
  Time Sync Mode: Sntp
  TimeP Mode [Disabled] : Manual   Server Address : 10.10.28.100
  Poll Interval (min) [720] : 720

Syntax:


show management

Helps you to easily examine and compare the IP addressing on the switch. It lists the IP addresses for all time servers configured on the switch plus the IP addresses and default gateway for all VLANs configured on the switch.

Display showing IP addressing for all configured time servers and VLANs

switch(config)# show management

 Status and Counters - Management Address Information

  Time Server Address : 10.10.28.100

  Priority SNTP Server Address                            Protocol Version
  -------- ---------------------------------------------- ----------------
  1        10.10..28.101                                  3
  2        10.255.5.24                                    3
  3        fe80::123%vlan10                               3


  Default Gateway : 10.0.9.80
 
  VLAN Name    MAC Address         | IP Address
  ------------ ------------------- + -------------------
  DEFAULT_VLAN 001279-88a100       | 10.30.248.184
  VLAN10 001279-88a100             | 10.0.10.17