aruba-vpn type

Syntax

aruba-vpn type amp peer-ip <IP_addr> backup-peer-ip <IP_addr>

no aruba-vpn type amp peer-ip <IP_addr> backup-peer-ip <IP_addr>

aruba-vpn type any peer-ip <IP_addr> backup-peer-ip <IP_addr>

no aruba-vpn type any peer-ip <IP_addr> backup-peer-ip <IP_addr>

Description

Configure the Aruba VPN type, peer IP address. When Aruba VPN type is any, the tunnel is established independent of Airwave configuration.

The no form of the command removes the aruba-vpn type statement from the configuration.

Parameters

type

Configure the controller IP.

amp

Configure Remote Access VPN session to protect specific switch generated traffic. It also supports secure ZTP of Airwave Management Platform (AMP) server.

any

Configure Remote Access VPN session to protect specific switch generated traffic. Secure ZTP is not supported.

<IP_addr>

IP address of the VPN.

Usage

switch(config)# aruba-vpn type 

switch(config)# aruba-vpn type amp 

switch(config)# aruba-vpn type amp peer-ip

switch(config)# aruba-vpn type any
NOTE:
  • When you configure aruba-vpn type as any, the switch creates a tunnel and updates the inner-ip.

  • You can create routes using the ip route command for next hop as aruba-vpn sends management traffic over the tunnel. For example: ip route 2.0.0.0 255.255.255.0 tunnel aruba-vpn