OpenFlow Events

The following are the events related to OpenFlow.

Event ID: 3850

Message
OpenFlow is globally enabled.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information

Event ID: 3851

Message
OpenFlow is globally disabled.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information

Event ID: 3852

Message
Instance <INSTANCE_NAME> has been enabled in Active|Passive mode with Flow Location Hardware Only|Hardware and Software.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when an OpenFlow instance is enabled.

Event ID: 3853

Message
Instance <INSTANCE_NAME> has been disabled.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when an OpenFlow instance is disabled

Event ID: 3854 (Severity: Warning)

Message
Failed to enable instance <INSTANCE_NAME>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when an OpenFlow instance enable operation fails.

Event ID: 3856 (Severity: Warning)

Message
Instance <INSTANCE_NAME>, OperStatus Down: resources not available.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when the instance is operationally brought down due to lack of hardware resources.

Event ID: 3857 (Severity: Warning)

Message
Instance <INSTANCE_NAME>, OperStatus Down: Hardware lookup creation for default rule failed.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when an OpenFlow instance enable operation fails due to a hardware operation failure.

Event ID: 3858 (Severity: Warning)

Message
Software rate limiter creation failed for instance <INSTANCE_NAME>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when the software rate-limiter creation fails for an OpenFlow instance.

Event ID: 3859 (Severity: Warning)

Message
Instance <INSTANCE_NAME>, OperStatus Down: Member VLAN does not exist.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when the instance is operationally brought down due to absence of any of the member VLAN(s) in the switch configuration.

Event ID: 3860 (Severity: Warning)

Message
Instance <INSTANCE_NAME>, OperStatus Down: Failed to add default/table miss rule.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when the instance is operationally brought down due to a failure in adding the default rule on a hardware table.

Event ID: 3861 (Severity: Warning)

Message
Instance <INSTANCE_NAME>: Rule could not be deleted from hardware.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when deletion of a rule from hardware fails.

Event ID: 3862 (Severity: Warning)

Message
Member VLAN: <VLAN_ID> got added for instance: <INSTANCE_NAME>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when a member VLAN of an OpenFlow instance is configured on the switch.

Event ID: 3863 (Severity: Warning)

Message
Controller VLAN: <VLAN_ID> got added for instance: <INSTANCE_NAME>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when a controller VLAN of an OpenFlow instance is configured on the switch.

Event ID: 3864 (Severity: Warning)

Message
Member VLAN: <VLAN_ID> got deleted for instance: <INSTANCE_NAME>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when a member VLAN of an OpenFlow instance is removed on the switch.

Event ID: 3865 (Severity: Warning)

Message
Controller VLAN: <VLAN_ID> got deleted for instance: <INSTANCE_NAME>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when a controller VLAN of an OpenFlow instance is removed on the switch.

Event ID: 3866 (Severity: Warning)

Message
No physical ports for instance: <INSTANCE_NAME>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when an OpenFlow instance is enabled with no physical ports available on any of its configured member VLAN(s).

Event ID: 3867 (Severity: Warning)

Message
Instance <INSTANCE_NAME>: listen port TCP-PORT already in use.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when the TCP port configured for an OpenFlow instance is already in use.

Event ID: 3868 (Severity: Warning)

Message
Instance <INSTANCE_NAME>: Hardware lookup creation failed.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when a hardware lookup creation fails for an OpenFlow instance.

Event ID: 3869

Message
Instance <INSTANCE_NAME>: Entering|Exiting fail secure mode.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when an OpenFlow instance enters or exits fail secure mode.

Event ID: 3870

Message
Instance <INSTANCE_NAME>: Entering|Exiting fail standalone mode.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when an OpenFlow instance enters or exits fail stadalone mode.

Event ID: 3871 (Severity: Warning)

Message
Instance <INSTANCE_NAME>- OperStatus Down: Controller VLAN does not exist.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when the operational status of an OpenFlow instance is brought down if one of the configured controller VLAN(s) for the instance exist on the switch.

Event ID: 3872

Message
Service tunnel interface TUNNEL-INDEX for an Openflow instance <INSTANCE_NAME>- is up
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when the service tunnel interface goes up.

Event ID: 3873

Message
Service tunnel interface TUNNEL-INDEX for an Openflow instance <INSTANCE_NAME>- is down
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when the service tunnel interface goes down.

Event ID: 3874

Message
Service tunnel interface TUNNEL-INDEX is added to an Openflow instance <INSTANCE_NAME>
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when a service tunnel interface is added to an OpenFlow instance.

Event ID: 3875

Message
Service tunnel interface TUNNEL-INDEX is deleted from an Openflow instance <INSTANCE_NAME>
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when a service tunnel interface is removed from an OpenFlow instance.

Event ID: 3876 (Severity: Warning)

Message
OPENFLOW: TCP connection failed while connecting to the controller with IP address <IP_ADDRESS> <via SSL>.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when the TCP connection to the controller fails.

Event ID: 3877

Message
VxLAN tunnel interface TUNNEL-INDEX is added to an Openflow instance <INSTANCE_NAME>.
Platforms KB, WC
Category OpenFlow
Severity Information

Event ID: 3878

Message
VxLAN tunnel interface TUNNEL-INDEX is deleted from an Openflow instance <INSTANCE_NAME>.
Platforms KB, WC
Category OpenFlow
Severity Information

Event ID: 3879

Message
VxLAN tunnel interface TUNNEL-INDEX for an Openflow instance <INSTANCE_NAME>- is up.
Platforms KB, WC
Category OpenFlow
Severity Information

Event ID: 3880 (Severity: Warning)

Message
VxLAN tunnel interface TUNNEL-INDEX for an Openflow instance <INSTANCE_NAME>- is down.
Platforms KB, WC
Category OpenFlow
Severity Warning

Event ID: 3881 (Severity: Warning)

Message
A port steal request is received for port <PORT_ID>. The port has INTEGER-NUMBER OpenFlow rules associated with it.
Platforms KB, WC
Category OpenFlow
Severity Warning

Event ID: 3882

Message
Tap interface TUNNEL-INDEX is added to an Openflow instance <INSTANCE_NAME>
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when a tap interface is added to an OpenFlow instance.

Event ID: 3883

Message
Tap interface TUNNEL-INDEX is deleted from an Openflow instance <INSTANCE_NAME>
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when a tap interface is removed from an OpenFlow instance.

Event ID: 3884

Message
Tap interface TUNNEL-INDEX for an Openflow instance <INSTANCE_NAME>- is up
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when a tap interface goes up.

Event ID: 3885

Message
Tap interface TUNNEL-INDEX for an Openflow instance <INSTANCE_NAME>- is down
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Information
Description Message displays when a tap interface goes down.

Event ID: 3886 (Severity: Warning)

Message
Enabling instance <INSTANCE_NAME>; hardware is busy.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays when enabling an OpenFlow instance fails since the hardware is busy.

Event ID: 3887 (Severity: Warning)

Message
mode passive' config is supported only for version 1.0.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays to indicate that passive mode is applicable only for an OpenFlow instance running 1.0 version.

Event ID: 3888 (Severity: Warning)

Message
flow-location hardware-only' config is supported only for an OpenFlow version 1.0 instance. Resetting the flow-location value to 'hardware and software'.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description Message displays to indicate that flow-location hardware-only option is applicable only for an OpenFlow instance running 1.0 version.

Event ID: 3889 (Severity: Warning)

Message
Unexpected request for tunnel loopback port rule addition received.
Platforms K, KA, KB, WB, WC
Category OpenFlow
Severity Warning

Event ID: 3890 (Severity: Warning)

Message
Creation of table <TABLE_ID> failed for instance <INSTANCE> due to lack of     contiguous memory in hardware.
Platforms KA, KB, WB, WC
Category OpenFlow
Severity Warning
Description This log message informs about the creation of table failed for instance due to lack of contiguous memory in hardware.