ACL Events
The following are the events related to ACL.
Event ID: 43 (Severity: Warning)
| Message | unable to apply <ACL_NAME> to vlan <VLAN_ID>- failed to add entry <ENTRY_ID> to port <LPORT> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error applying the ACL due to lack of hardware resources. |
Event ID: 44 (Severity: Warning)
| Message | Unable to add ACL entry to vlan <VLAN_ID>- not enough hw resources on port <LPORT> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error attempting to add an entry to an ACL that has already been applied to a VLAN. |
Event ID: 45 (Severity: Warning)
| Message | Unable to add port to vlan <VLAN_ID>- not enough hw resources on port <LPORT> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error attempting to add a port to a VLAN that has an ACL applied. |
Event ID: 46 (Severity: Warning)
| Message | Unable to add port to vlan <VLAN_ID>- GVRP is enabled |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error attempting to apply the ACL to a VLAN because GVRP is enabled. |
Event ID: 47 (Severity: Warning)
| Message | Unable to add port <LPORT> to trunk- ACL is configured on vlan <VLAN_ID> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error attempting to add a port to a dynamic trunk. Dynamic trunks are not allowed to be configured on ports with ACLs applied. |
Event ID: 48 (Severity: Warning)
| Message | Unable to apply ACL or Policy NAME to port <LPORT>- failed to add entry <ENTRY_ID> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error applying the ACL due to lack of hardware resources. |
Event ID: 49 (Severity: Warning)
| Message | acl: unable to add port to dynamic trunk- ACL is configured on port <LPORT> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that the port cannot be added to a trunk because the port has an ACL applied, or the port cannot be enabled for LACP because the port has an ACL applied. |
Event ID: 50 (Severity: Warning)
| Message | Unable to add ACL to port <LPORT>- an ACL or Policy is already configured on this port |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error attempting to add a port to a dynamic trunk. Dynamic trunks are not allowed to be configured on ports with ACLs applied. |
Event ID: 51 (Severity: Warning)
| Message | Unable to modify ACL <LPORT>- ACL is applied. |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log even informs the users that the ACL on <LPORT> was not modified because an ACL was already applied. |
Event ID: 52 (Severity: Warning)
| Message | Unable to delete ACL <LPORT>- ACL is applied. |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log even informs the users that the ACL on <LPORT> was not deleted because an ACL was already applied. |
Event ID: 53 (Severity: Warning)
| Message | acl: unable to apply <ACL_NAME> to vlan <VLAN_NAME>- failed to add entry <ENTRY_ID> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error applying the ACL due to lack of hardware resources. |
Event ID: 54 (Severity: Warning)
| Message | acl: unable to apply <ACL_NAME> to vlan <VLAN_NAME>- failed to add entry <ENTRY_ID> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error applying the ACL to a tunnel or a port during init. |
Event ID: 55 (Severity: Warning)
| Message | acl: unable to apply <ACL_NAME>- failed to add entry <ENTRY_ID>- max ACE limit reached |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error applying the ACL due to max system ACE limit |
Event ID: 3348 (Severity: Warning)
| Message | Invalid ACE has been deleted from ACL <ACL_NAME> |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that an ACE was deleted from an ACL because the ACE conflicted with another entry that was using the same match parameters, or the ACE was a duplicate of another already in the list. |
Event ID: 3349 (Severity: Warning)
| Message | unable to add ACL <ACL_NAME>- not enough hw resources available |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that when processing ACL configuration during init, a failure occurred enabling the deny IPv4 tcp fragment option or enabling the IPv6 option to deny packets with too many extension headers. |
Event ID: 4600 (Severity: Warning)
| Message | Unable to apply ACL <ACL_NAME> in direction <In|OUT> because the <VLAN_ID> specified is invalid |
| Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that there was an error applying the ACL due to the Invalid VLAN_ID. |
Event ID: 5534 (Severity: Warning)
| Message | A duplicate entry (source IP: <SRC_IP>- destination IP: <DST_IP>- destination port: <DST_PORT>.) within an alias ACE (seq num: <SEQ_NUM>) has not been configured. |
| Platforms | KB, WB, WC, YC |
| Category | ACL |
| Severity | Warning |
| Description | acl: A duplicate entry (source IP, destination IP ; destination port) within an alias ACE (seq num) has not been configured. This log event informs the user that during expansion of an alias ACE, a duplicate entry was found and not configured. |
Event ID: 5535 (Severity: Warning)
| Message | A conflicting entry (source IP: <SRC_IP>- destination IP: <DST_IP>- destination port: <DST_PORT>.) within an alias ACE (seq num: <SEQ_NUM>) has not been configured. |
| Platforms | KB, WB, WC, YC |
| Category | ACL |
| Severity | Warning |
| Description | This log event informs the user that during expansion of an alias ACE, a conflicting entry was found and not configured. |
Event ID: 5536 (Severity: Warning)
| Message | One or more alias ACE entries were not configured as the maximum limit of configurable ACEs is reached. |
| Platforms | KB, WB, WC, YC |
| Category | ACL |
| Severity | Warning |
| Description | acl: One or more alias ACE entries were not configured as the maximum limit of configurable ACEs is reached. This log event informs the user that during expansion of an alias ACE, one or more alias ACE entries were not configured as maximum limit of configurable ACEs has reached. |