User Tunneled Node Events
The following are the events related to user tunneled node.
Event ID: 5401
Message | Server <IP_ADDR> is <PORT_CAPABILITY> capable. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | Capability of a Aruba Mobility Controller is logged. This log mentions whether the given Controller is Per Port or Per User Capable. Server <Controller Ip> is <Per Port| Per User> capable. |
Event ID: 5402
Message | Switch Anchor Controller (SAC) is <IP_ADDR>. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | Primary Switch Anchor Controller's(A-SAC's) IP is logged. This log provides the IP of Primary SAC Switch Anchor Controller (SAC) is <Controller Ip>. |
Event ID: 5403
Message | Standby Switch Anchor Controller is <IP_ADDR>. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | Secondary Switch Anchor Controller's(S-SAC's) IP is logged. This log provides the IP of Secondary SAC Standby Switch Anchor Controller is <Controller Ip>. |
Event ID: 5404
Message | <EVENT_NAME> event received from Switch Anchor Controller (SAC) <IP_ADDR>. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | Event received from SAC is logged. <Event Name> event received from Switch Anchor Controller (SAC) <SAC Ip> |
Event ID: 5405
Message | Anchor controller <IP_ADDR> is down. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | This log notifies that the primary controller is down. Anchor controller <Controller Ip> is down |
Event ID: 5406
Message | Port <PORT_NAME>: tunnel established to User Anchor Controller (UAC) <IP_ADDR> for user <CLIENT_MAC_ADDR>. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | This log notifies that a tunnel has been established from a particular port to a given UAC for the specific user. |
Event ID: 5407
Message | Tunneling user <CLIENT_MAC_ADDR> traffic to User Anchor Controller (UAC) <IP_ADDR> failed due to reason: <REASON_MSG>. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | This log notifies that tunneling for a particular User failed due to given reason. |
Event ID: 5408
Message | Communication failure with Anchor Controller <IP_ADDR> due to reason: <REASON_MSG>. |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Information |
Description | This log notifies that communication with a Controller failed with given reason code. |
Event ID: 5409 (Severity: Warning)
Message | Misconfiguration detected for user <USER_NAME>: uplink port <PORT_ID> is member of client VLAN <VLAN_ID>; User traffic will not be tunneled |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Warning |
Description | This logs VLAN misconfiguration. uplink port is part of the client VLAN. |
Event ID: 5451
Message | <DST_IP> reachable via vlan <VLAN_ID> (<GATEWAY_IP>) |
Platforms | KB, WC |
Category | User Tunneled Node |
Severity | Debug |
Description | <dstip> reachable via vlan <vlanid> (gateway ip) |