Manager Events
The following are the events related to manager.
Event ID: 177
Message | changing time |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | Changing time. |
Event ID: 178
Message | Updated time by <CURRENT_TIME - OLD_TIME> seconds. Previous time was <DATE_STR>. Current time is <CURRENT DATE_STR> |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | Updated time by <CURRENT TIME-OLD TIME> seconds. Previous time was <DATE_STR>. Current time is <CURRENT DATE_STR> |
Event ID: 179
Message | SME <CONSOLE SESSION> - <OPERATOR|MANAGER> Mode |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | SME CONSOLE Session; OPERATOR Mode established A console session has started (either via console port or telnet), and the console session has Operator priviledges. |
Event ID: 180 (Severity: Warning)
Message | A remote login attempt failed |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Description | A remote login attempt failed. |
Event ID: 181 (Severity: Warning)
Message | 10 invalid passwords on <CONSOLE|TELNET> session. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Event ID: 182
Message | password(s) removed via clear button |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | password(s) removed via clear button. |
Event ID: 183 (Severity: Warning)
Message | password file corrupted - ignoring passwords |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Description | Password file corrupted; ignoring passwords. |
Event ID: 184
Message | Log cleared as a result of 'clear logging' command |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | Log cleared as a result of 'clear logging' command. |
Event ID: 185
Message | Security Log cleared as a result of 'clear security-logging' command |
Platforms | KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | Security Log cleared as a result of 'clear security-logging' command. |
Event ID: 186
Message | User:'<USER_NAME>': The command log buffer is cleared. |
Platforms | KB, WB, WC, YC |
Category | Manager |
Severity | Information |
Description | This log event informs about the User where the command log buffer is cleared. |
Event ID: 217
Message | Config file updated to default configuration. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 218
Message | Config file converted due to OS upgrade. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 219
Message | Config file updated via configuration editor. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 220
Message | Config file updated from network download. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 221
Message | Config file erased via testmode clear command. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 222
Message | Config file erased via the CLI erase command. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 223
Message | Config file updated via Bootp Reply. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 224 (Severity: Warning)
Message | No configuration summary record |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Event ID: 225 (Severity: Warning)
Message | Attempt to store a string with an illegal character (tilde): <STRING> |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Description | Attempt to store a string with an illegal character (tilde): STRING |
Event ID: 226 (Severity: Warning)
Message | Unsupported feature "FEC" for trunk configuration; see release notes. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Description | Unsupported feature "FEC" for trunk configuration. |
Event ID: 227
Message | Partial config deleted for subsystem=<SUBSYSTEM_NAME>; see release notes. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | Partial config deleted for subsystem=<SUBSYSTEM_NAME>. |
Event ID: 897
Message | The existing config requires changing default for parameter: FEATURE-NAME |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2611
Message | <SUBSYSTEM_NAME> subsystem saved some internal change(s) to startup config. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2612
Message | <SUBSYSTEM_NAME> subsystem saved the whole running config to startup config. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2613
Message | Inconsistent config for the subsystem <SUBSYSTEM_NAME>; at least one loopback interface must exist on the System before configuring ipv6 address |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Standard |
Event ID: 2614
Message | Config attempt failed: <ERROR_MSG>. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2615
Message | SVLANs cannot be added to any MST Instance in qinq mixedvlan mode. Inconsistent configurations have been deleted. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2616
Message | The number of IPV6 ND DAD attempts was reduced to the maximum of 255. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2618
Message | Software downgrade performed from <IMAGE_VERSION>, to <IMAGE_VERSION>. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2619
Message | A configuration file operation is already in progress. Please try again later. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2620
Message | A corruption was found in the configuration file. The corrupted section was ignored. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 2621
Message | MAC Mirroring cannot be enabled while Distributed Trunking (switch-interconnect) is enabled. MAC Mirroring configurations have been removed. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | MAC Mirroring cannot be enabled while Distributed Trunking (switch-interconnect) is enabled.MAC Mirroring configurations have been removed. |
Event ID: 2622
Message | Configuration failed. Configuration resources exceeded maximum limit |
Platforms | KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | Configuration failed. Configuration resources exceeded maximum limit. |
Event ID: 2700 (Severity: Warning)
Message | Firmware downgrade is not allowed if DHCPv4 Snooping or DHCPv6 Snooping is configured on a V3 module port that cannot be supported after downgrade. |
Platforms | KA, KB, WB |
Category | Manager |
Severity | Warning |
Event ID: 3125
Message | new Startup Config Seq Num = SEQ-NUMBER by UI-TYPE. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | new Startup Config Seq Num = NUMBER by UI. |
Event ID: 4243
Message | Moved to manager mode for the SSH/TELNET session from IP address <IP_ADDRESS>., User USER-NAME |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Description | User USER-NAME : Moved to manager mode for the SSH/TELNET session from IP address IP-ADDRESS. |
Event ID: 4331
Message | syslog: Information logging started on the SYSLOG server <SERVER_ADDRESS> over <TRANSPORT_PROTOCOL> protocol |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 4332
Message | syslog: Information logging stopped on the SYSLOG server <SERVER_ADDRESS> over <TRANSPORT_PROTOCOL> protocol |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 4754
Message | Maximum session for console access is set to <MAXIMUM_SESSION_LIMIT>. Access to device is permitted only via Console; Telnet and SSH access is not permitted. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 4755
Message | The active sessions is more than the maximum configured sessions <MAXIMUM_SESSION_LIMIT>. This change takes effect when the active sessions are less than <MAXIMUM_SESSION_LIMIT> sessions. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 4831 (Severity: Warning)
Message | SME SESSION is rejected because maximum user session limit is reached for <USERNAME>. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Event ID: 4832 (Severity: Warning)
Message | SME TELNET/SSH from <IP_ADDRESS> is rejected because maximum session limit is reached. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Warning |
Event ID: 5051
Message | Configuration conversion failed on downgrade. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 5052
Message | Configuration conversion for TRUNK/SLOT <PORT_ID>/SLOT-ID failed on downgrade. |
Platforms | K, KA, KB, RA, WB, WC, YA, YB, YC |
Category | Manager |
Severity | Information |
Event ID: 5175 (Severity: Warning)
Message | Firmware downgrade is not allowed if MSTP instances configured are greater than 16; or the max-vlans value is greater than PREVIOUS-MAX-VLAN-LIMIT or this system is part of a VSF stack. |
Platforms | KA, KB, WB |
Category | Manager |
Severity | Warning |
Event ID: 5178 (Severity: Warning)
Message | Firmware downgrade is not allowed if this system is part of a VSF stack. |
Platforms | WC, YC |
Category | Manager |
Severity | Warning |
Description | This informs about the firmware downgrade is not allowed if this system is part of a VSF stack. |
Event ID: 5179 (Severity: Warning)
Message | Firmware downgrade is blocked because one or more ports on vsf links do not match global port speed. |
Platforms | KB |
Category | Manager |
Severity | Warning |
Description | downgrade from tacoma or higher to richmond or spokane with VSF link ports supporting different speeds |
Event ID: 5383 (Severity: Warning)
Message | VSF: The standby failed for the sequenced-reboot command; aborting the command. |
Platforms | KB |
Category | Manager |
Severity | Warning |
Description | This log event informs the VSF about the standby failed for the sequenced-reboot command; aborting the command. |
Event ID: 5384 (Severity: Warning)
Message | VSF LLDP MAD feature is disabled since it can not support more than two members. |
Platforms | KB, WC |
Category | Manager |
Severity | Warning |
Description | This log event informs the VSF LLDP MAD feature is disabled since it can not support more than two members. |
Event ID: 5562 (Severity: Warning)
Message | Firmware downgrade is not allowed when routes are configured with aruba-vpn tunnel as the destination. |
Platforms | KA, KB, WB, WC, YC |
Category | Manager |
Severity | Warning |
Event ID: 5574 (Severity: Warning)
Message | Firmware downgrade is not allowed if aruba vpn is configured with type any. Please unconfigure it before attempting to downgrade. |
Platforms | KA, KB, WB, WC, YC |
Category | Manager |
Severity | Warning |
Description | This informs about the firmware downgrade is not allowed if aruba vpn is configured with type any. |
Event ID: 5732 (Severity: Warning)
Message | Firmware downgrade is not allowed when password non-plaintext-sha256 is enabled and include-credentials is disabled. |
Platforms | WB, WC, YC |
Category | Manager |
Severity | Warning |
Description | This message will be logged if the switch is downgraded to version 16.02 or earlier. |
Event ID: 5733 (Severity: Warning)
Message | Firmware downgrade is not allowed when smartrate port is configured with auto-100. Please change the speed-duplex to other configuration. |
Platforms | WC, YC |
Category | Manager |
Severity | Warning |
Description | This message will be logged if the switch is downgraded to version of software earlier than 16.06. |
Event ID: 5736 (Severity: Warning)
Message | Firmware downgrade is not allowed in a VSF stack having members with member ID more than 4. Please remove such members before attempting to downgrade. |
Platforms | WC, YC |
Category | Manager |
Severity | Warning |
Description | This message will be logged because firmware downgrade is not allowed in a VSF stack having members with member ID more than 4. Please remove such members before attempting to downgrade. |
Event ID: 5742 (Severity: Warning)
Message | Firmware downgrade is not allowed when alias-ACE and non-alias-ACE co-exist. Please remove either of the ACE's to continue the downgrade. |
Platforms | WB, WC, YC |
Category | Manager |
Severity | Warning |
Description | This message will be logged if the switch software is downgraded to a version prior to 16.06. |