Configuring BGP globally

Global BGP configuration commands
Command syntax	Description	Default	CLI reference
`router bgpas-#` `no router bgp`	Configures a BGP routing process.	Not enabled.	Configuring a BGP routing process
`bgp router-id router-id` `no bgp router id`	Configures a fixed router ID for the local Border Gateway Protocol (BGP) routing process.		Configuring a fixed router ID for local BGP routing process
`[no] network ipv4/mask [route-map route-map-name]`	To specify the networks to be advertised by the Border Gateway Protocol (BGP) routing processes, use the `network` command.		Specifying the networks to be advertised by the BGP routing process
`[no] bgp timers keep-alive hold-time`	To adjust BGP network timers, use the `bgp timers` command in router configuration mode.		Adjusting BGP network timers
`[no] enable` `disable`	Re-enables the state contained within this node and all child nodes of the Border Gateway Protocol (BGP) process.	Disabled	Re-enabling state contained within nodes of BGP processes