Validation rules
Validation |
Error/Warning/Prompt |
|---|---|
When the lldp-bypass is enabled on the port, different error messages are displayed. |
If MAC lockdown is enabled on the port:
Error configuring port A1: lldp-bypass cannot be enabled on a port with MAC lock-enabled.If learn-mode is configured on the port: A1: lldp-bypass cannot be enabled on the port with learn-mode configured.If MACsec is configured on the port: Error configuring port A1: lldp-bypass cannot be enabled on the port with MACsec-enabled.If trunk is configured on the port: Error configuring port A1: lldp-bypass cannot be enabled on the port with mesh or manual trunks configured.If mesh is configured on the port: lldp-bypass cannot be enabled on the port with mesh or manual trunks configured.If Distributed Trunking is configured on the port: lldp-bypass cannot be enabled on the port with mesh or manual trunks configured. |
When MACsec is enabled on the port: |
If lldp-bypass is enabled on the port:
Cannot apply MACsec on the port A1 when lldp-bypass is enabled on that port. |
When learn-mode is configured on the port: |
If lldp-bypass is enabled on the port:
A1: Cannot apply learn-mode on the port A1 when lldp-bypass is enabled on that port. |
When trunk, distributed trunk or mesh is configured on the port: |
If lldp-bypass is enabled on the port:
Cannot apply mesh or manual trunks on the port A1 when lldp-bypass is enabled on that port. |
When MAC-lockdown is enabled on the port: |
If lldp-bypass is enabled on the port:
Cannot apply MAC lock-enable on the port A1 when lldp-bypass is enabled on that port. |
Security Warning when enabling lldp-bypass on the port. |
Enabling lldp-bypass on the port may give access to any Aruba-AP that sends a special LLDP TLV without undergoing any authentication. This configuration may allow network access to the rogue devices that are capable of sending the special LLDP TLV Do you want to continue? [y/n]: |