mirror endpoint

Syntax

mirror endpoint ip  <SRC-IP-ADDR>   <SRC-UDP-PORT>  <DST-IP-ADDR>  port  <EXIT-PORT> 
      

Description

Enter this command on a remote switch to configure the exit port to use in a remote mirroring session. to configure the mirroring source on the local switch.

The mirror endpoint ip command configures:

• The unique UDP port number to be used for the mirroring session on the source switch. The recommended port range is from 7933 to 65535.

• The IP address of the source switch to use in the session.

• The IP address and exit-port number on the remote (endpoint) switch.

In a remote mirroring endpoint, the IP address of exit port and the remote destination switch can belong to different VLANs.