Viewing the remote endpoints configured on the switch

Syntax


show monitor endpoint
Displays the remote mirroring endpoints configured on the switch. Information on local sessions configured on the switch is not displayed. (To view the configuration of a local session, use the

show monitor [1-4 | name name-str ]]
command, as described on page 74 and page 77.)

Type

Indicates whether the session is a port (local) or IPv4 (remote) mirroring session.

show monitor endpoint

The IP address configured for the source VLAN or subnet on which the monitored source interface exists. In the configuration of a remote session, the same UDP source address must be configured on the source and destination switches.

UDP port

The unique UDP port number that identifies a remote session. In the configuration of a remote session, the same UDP port number must be configured on the source and destination switches.

UDP Dest Addr

The IP address configured for the destination VLAN or subnet on which the remote exit port exists. In the configuration of a remote session, the same UDP destination address must be configured on the source and destination switches.

Dest Port

fies the exit port for a remote session on a remote destination switch.

Example

In Displaying the configuration of remote mirroring endpoints on the switch, the show monitor endpoint output shows that the switch is configured as the remote endpoint (destination) for two remote sessions from the same monitored source interface.

Displaying the configuration of remote mirroring endpoints on the switch