Debug/syslog configuration commands

Using the Debug/Syslog feature, you can perform the following operations:

Configure the switch to send Event Log messages to one or more Syslog servers. In addition, you can configure the messages to be sent to the User log facility (default) or to another log facility on configured Syslog servers.
Configure the switch to send Event Log messages to the current management- access session (serial-connect CLI, Telnet CLI, or SSH).
Disable all Syslog debug logging while retaining the Syslog addresses from the switch configuration. This allows you to configure Syslog messaging and then disable and re-enable it as needed.
Display the current debug configuration. If Syslog logging is currently active, the list f configured Syslog servers is displayed.
Display the current Syslog server list when Syslog logging is disabled.