show ipv6 route

Syntax

show ipv6 route ipv6-addr connected

Description

Displays the routes in the IPv6 routing table of the switch.

Options

ipv6-addr

Optional. Limits the output to show the gateway to the specified IPv6 address.

connected

Optional. Limits the output to show only the gateways to IPv6 addresses connected to VLAN interfaces configured on the switch, including the loopback (::1/128) address.

Dest

The destination address for a detected route.

Gateway

The IPv6 address or VLAN interface used to reach the destination. (Includes the loopback address.)

Type

Indicates route type (static, connected, or OSPF).

Distance

The administrative route distance, used to determine the best path to the destination.

Metric

Indicates the route cost for the selected destination.

Example output

This example displays the routes in the IPv6 routing table of the switch.

“Unknown” Address
Dest : ::/0                                     Type : static
Gateway : fe80::213:c4ff:fedd:14b0%vlan10              Dist. : 40 Metric : 0
Loopback Address
Dest : ::1/128                                  Type : connected
Gateway : lo0                                          Dist. : 0 Metric : 1
Global Unicast Address configured on the Switch
Dest : 2001:db8:a03:e102::/64                   Type : connected
Gateway : VLAN10                                       Dist. : 0 Metric : 1
Link-Local Address configured on the Switch
Dest : fe80::%vlan10                            Type : connected
Gateway : VLAN10                                       Dist. : 0 Metric : 1
Link-Local Address Assigned to the Loopback Address
Dest : fe80::1%lo0                              Type : connected
Gateway : lo0                                          Dist. : 0 Metric : 1