Error Log

On configuring Distributed Trunking on a VLAN where PIM-SM is already configured the following errors may appear.

Error Log

Feature

Error

Message

Configure DT when PIM enabled

SWITCH_ERRORMSG_DT_CANNOT_CONFIGURE_DT

Cannot configure Distributed Trunking on a VLAN port that has PIM-SM configured.

SWITCH_ERRORMSG_DT_CANNOT_CONFIGURE_DT_ON_PIM_DEFAULT_VLAN

Cannot configure Distributed Trunking because PIM-SM is enabled on DEFAULT VLAN.

Configure PIM-SM when DT enabled

SWITCH_ERRORMSG_DT_CANNOT_CONFIGURE_PIM

Cannot configure PIM-SM on a VLAN that has Distributed Trunking configured.

V1 module with PIM-DM DT

Enabling V1 module with PIM-DM & DT are enabled on the same VLAN.

Cannot enable V1 modules when PIM-DM and Distributed Trunking are configured on the same VLAN.

  Enabling PIM-DM or DT when V1 module is allowed.

PIM-DM and Distributed Trunking cannot be configured on the same VLAN when V1 modules are enabled.

NOTE:

Distributed Trunking between different type of switches is not supported. If the switch platforms do not match, an error message will return similar to inconsistent criteria.