dr-priority

Syntax

dr-priority <PRIORITY>


no dr-priority 

Description

Changes the router priority for the DR election process in the current VLAN. A numerically higher value means a higher priority. If the highest priority is shared by multiple routers in the same VLAN, the router with the highest IP address is selected as the DR. The default priority is 1. Range: 0 to 4294967295.

The no form of this command disables the DR operation for the router on the current VLAN.

Command context

vlan-x-pim6-sparse

Parameters

<PRIORITY>

Specifies the router priority for the DR. The range can be 0 to 4294967295.