show ip igmp vlan counters

This command is used to show IGMP counters for a VLAN.

Syntax

show ip igmp vlan <vid> counters

Example output

Below is the output when version is set to 3.

switch(vlan-60)# show ip igmp vlan 60 counters

IGMP service Vlan counters

VLAN ID : 60   NAME : VLAN60

                                            Rx           Tx          
                                            ------------ ------------
 V1 All Hosts Query                         0            0           
 V2 All Hosts Query                         0            0           
 V3 All Hosts Query                         12           0           
 V1 Group Specific Query                    0            0           
 V2 Group Specific Query                    0            0           
 V3 Group Specific Query                    8            0           
 Group and Source Specific Query            12           0           
 V3 Member Report                           22           22          
 V2 Member Report                           8            0           
 V1 Member Report                           0            0           
 V2 Member Leave                            0            0           
 Forward to Routers                         0            32          
 Forward to VLAN                            0            26          

 Errors:

 Unknown IGMP Type                          0           
 Unknown Packet                             0           
 Malformed Packet                           0           
 Bad Checksum                               0           
 Martian Source                             0           
 Packet received on IGMP-disabled Interface 0           
 Interface Wrong Version Query              0           

 Port Counters:

 Fast Leave          : 4                    
 Forced Fast Leave   : 0                    
 Membership Timeout  : 0