Validation rules
Validation |
Error/Warning/Prompt |
---|---|
If meshing is configured, tunneled node profile is not allow applied on a port. It is mutually exclusive. |
Cannot apply tunneled node profile on a port because meshing is enabled on the device. |
If tunneled node profile is applied on a port, configuring meshing is not allowed. It is mutually exclusive. |
Cannot enable meshing because tunneled node profile is applied on one or more ports. |
If tunneled node profile is applied on a port, configuring Q-in-Q is not allowed. It is mutually exclusive. |
Cannot enable Q-in-Q because tunneled node profile is applied on one or more ports. |
If Q-in-Q is configured, tunneled node profiling applied on a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on a port because Q-in-Q is enabled on the device. |
Trying to enable the distribute trunk on the switch when tunneled node profile is applied on a port. |
Cannot enable distributed trunking because tunneled node profile is applied on one or more ports. |
If distribute trunk is enabled on the switch, applying tunneled node profile to a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on a port because distributed trunking is enabled on the device. |
Trying to enable IPv4 multicast routing on the switch when tunneled node profile is applied on a port. It is mutually exclusive. |
Cannot enable IPv4 multicast routing because tunneled node profile is applied on one or more ports. |
If IPv4 multicast routing is configured on the switch, tunneled node profile applied on a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on a port because IPv4 multicast routing is configured on the device. |
Trying to enable OpenFlow on the switch when tunneled node profile is applied on a port. It is mutually exclusive. |
Cannot enable OpenFlow because tunneled node profile is applied on one or more ports. |
If OpenFlow is configured on the switch, tunneled node profile applied on a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on a port because OpenFlow is configured on the device. |
Trying to enable VxLAN on the switch when tunneled node profile is applied on a port. It is mutually exclusive. |
Cannot enable VxLAN because tunneled node profile is applied on one or more ports. |
If VxLAN is configured on the switch, tunneled node profile applied on a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on a port because VxLAN is configured on the device. |
If DIPLD is enabled on a port, tunneled node profile applied on a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on the port because DIPLD is applied on this port. |
If tunneled node profile is applied on a port, DIPLD applied on that port is not allowed. It is mutually exclusive. |
Cannot apply DIPLD on the port because tunneled node profile is applied on this port. |
If DIPLDv6 is enabled on a port, tunneled node profile applied on a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on the port because DIPLDv6 is applied on this port. |
If tunneled node profile is applied on a port, DIPLDv6 applied on that port is not allowed. It is mutually exclusive. |
Cannot apply DIPLDv6 on the port because tunneled node profile is applied on this port. |
If tunneled node profile is applied on a port, the port that is part of IPv6 ND Snooping enabled VLAN is not allowed. It is mutually exclusive. |
Cannot configure IPv6 ND Snooping on the VLAN because tunneled node profile is applied on one or more ports on that VLAN. |
If Virus Throttling is enabled on a port, tunneled node profile applied on a port is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on the port because Virus Throttling is applied on this port. |
If tunneled node profile is applied on a port, Virus Throttling applied on a port is not allowed. It is mutually exclusive. |
Cannot configure Virus Throttling on the port because tunneled node profile is applied on this port. |
Tunneled node profile cannot be applied on the trunks. |
Cannot apply tunneled node profile on the Trunks. |
If DHCP Client is enabled on a VLAN, tunneled node profile applied on the ports part of a VLAN is not allowed. It is mutually exclusive. |
Cannot apply tunneled node profile on the port because the port is part of the DHCP client enabled VLAN. |
If tunneled node profile is applied on a port, a port to which is part of a DHCP client enabled VLAN is not allowed. It is mutually exclusive. |
Cannot configure DHCP client on the VLAN because tunneled node profile is applied on one or more ports on that VLAN. |