rmonlog-set-threshold

Syntax

rmonlog-set-threshold <percentage>

no rmonlog-set-threshold <percentage>

Description

Configures the threshold percentage for RMON event logging. The default value is 80.

The no form of this command resets RMON event logging threshold to default value.

Command context

config

Parameters

percentage
Specifies the threshold percentage value between 1 to 100.

Examples

switch (config)# rmonlog-set-threshold 45
switch (config)# show running-config

Running configuration:

; JL071A Configuration Editor; Created on release #KB.16.06.0000x
; Ver #13:03.f8.1c.fb.7f.bf.bb.ff.7c.59.fc.7b.ff.ff.fc.ff.ff.3f.ef:05

hostname "switch"
module 1 type jl071x
flexible-module A type JL081A
interface A1
   speed-duplex auto-100
   exit
snmp-server community "public" unrestricted
oobm
   ip address dhcp-bootp
   exit
vlan 1
   name "DEFAULT_VLAN"
   untagged 1-24,A1-A4
   ip address dhcp-bootp
   ipv6 enable
   ipv6 address dhcp full
   exit
rmonlog-set-threshold 45

The following event log message is logged when the RMON log memory reaches the threshold value.

W 03/25/18 07:44:51 03443 system:The event log buffer is 45% full.