Configuring the savepower port-low-pwr option

The port-low-pwr option puts all the ports on the switch into auto low power mode if they are not linked.

Syntax:


[no] savepower port-low-pwr

Puts ports in low power mode.

When a link is detected, the ports return to normal power mode.

The no form of the command puts the ports into normal power mode.

The savepower port-low-power command

switch(config)# savepower port-low-pwr

To display the status of the power-down feature, use the show savepower portlow-pwr command. The output shows if the feature is enabled or not enabled.

Output for the show savepower port-low-pwr command

switch(config)# show savepower port-low-pwr

  Port Save Power Status: Enabled