Enabling MOE

Procedure

Use the CLI command to enable MOE for IPv4 multicast traffic. The running-config file displays the MOE enabled for IPv4 traffic.

Syntax

fabric-offload multicast ipv4 route {enable|disable}

Description

Enable or disable multicast offload engine for routed multicast IPv4 traffic.

Usage

fabric-offload multicast ipv4 route {enable|disable}

Example output

(Prev-mode)switch# show running-config

Running configuration:

; J9851A Configuration Editor; Created on release #KB.16.01.0000x
; Ver #0a:19.f4.7b.ff.ff.fc.ff.ff.3f.ef:b0 
hostname "HP-5412Rzl2" 
module A type j9992a
module L type j9987a
fabric-offload multicast ipv4 route enable
ip routing
ip multicast-routing
snmp-server community "public" unrestricted
oobm
ip address dhcp-bootp
exit
vlan 1
name "DEFAULT_VLAN"
untagged A1-A21,L1-L24
ip address dhcp-bootp
exit
no allow-v2-modules
preview-mode