CIDR notation usage to enter the IPv6 ACL prefix length

CIDR (classless interdomain routing) notation is used to specify ACL prefix lengths. The switch compares the address bits specified by a prefix length for an SA or DA in an ACE with the corresponding address bits in a packet being filtered by the ACE. If the designated bits in the ACE and in the packet have identical settings, the addresses match.
Examples of CIDR notation for prefix lengths

SA or DA used in an ACL with CIDR notation

Resulting prefix length defining an address match

Meaning

2620:0:a03:e102::/64

2620:0:a03:e102

The leftmost 64 bits must match. The remaining 64 bits are wildcards.

2620:0:a03:e102:215::/80

2620:0:a03:e102:215

The leftmost 80 bits must match. The remaining 48 bits are wildcards.

2620:0:a03:e102:215:60ff:fe7a:adc0/128

2620:0:a03:e102:215:60ff:fe7a:adc0

All 128 bits must match. This specifies a single host address.

2001:db8:a03:e102:0:ab4:100::/112

2001:db8:a03:e102:0:ab4:100

The leftmost 112 bits must match. The remaining 16 bits are wildcards.