Setting the DHCPv4 binding database location
-
Client MAC address
-
Port number
-
VLAN identifier
-
Leased IP address
-
Lease time
Syntax
[no] dhcp-snooping database [file<tftp://<ip-address>/<ascii-string>>][delay<15-86400>][timeout<0-86400>]
- file
-
Specifies a file in Uniform Resource Locator (URL) format — “tftp://ip-address/ascii-string”. The maximum filename length is 63 characters.
- delay
-
Specifies the number of seconds to wait before writing to the database. Default = 300 seconds.
- timeout
-
Specifies the number of seconds to wait for the database file transfer to finish before returning an error. A value of zero (0) means retry indefinitely. Default = 300 seconds.
A message is logged in the system event log if the DHCP binding database fails to update. To display the contents of the DHCP snooping binding database, enter this command.
Syntax
show dhcp-snooping binding
If a lease database is configured, the switch drops all DHCPv4 packets until the lease database is read. This only occurs when the switch reboots and is completed quickly. If the switch is unable to read the lease database from the tftp server, it waits until that operation times out and then begins forwarding DHCP packets.