Using the CLI interface to enable web management over SSL/TLS


[no] web-management ssl

Enables or disables SSL on the switch

[port <1-65535 | default:443>]

The TCP port number for SSL connections (default: 443).

show config

Shows status of the SSL server. When enabled, webmanagement ssl is present in the config list.

To enable SSL on the switch:

  1. Install a web certificate if you have not already done so.

  2. Execute the web-management ssl command.

To disable SSL on the switch, do either of the following:

  • Execute [no] web-management ssl.

  • Remove the switch host certificate or certificate key.