Viewing the RACL and VACL assignments for a VLAN

This command briefly lists the identification andtypes of IPv4 RACLs and IPv4 and IPv6 VACLs currently assigned to a particular VLAN in the running-config file. For IPv4, the switch supports, per-VLAN, one inbound and one outbound RACL assignment per VLAN, plus one VACL assignment. For IPv6, the switch supports, per-VLAN, one VACL assignment.


show access-list vlan <vid>

Lists the current IPv4 and IPv6 ACL assignments to the specified VLAN (in the running config file).


This information also appears in the show running display. If you execute write memory after configuring an ACL, it also appears in the show config display.


The following output shows that all inbound IPv6 traffic and the inbound and outbound, routed IPv4 traffic are all filtered on VLAN 20.

Listing the ACL assignments for a VLAN