show ipv6 ospf3 link-state as-scope

The commands in this section enable display of the routing-switch's OSPFv3 link-state AS-scope database for the entire AS, with options for narrowing the scope of the output and increasing the range of settings included in the output.

Syntax

show ipv6 ospf3 link-state as-scope [ lsid lsid-# ][ router-id rtr-id-# ][detail|advertise]

Description

Displays link-state as-scope database for all links configured on the routing switch. The range of displayed data can be reduced by using one or more subset options:

Options

lsid lsid-#

Subset option to filter displayed LSA database or advertisements to show only the AS-scope data having the specified (32-bit) IP address as a link-state ID.

Can also be filtered with the router-id option to further define the source of displayed information.

router-id rtr-id-#

Subset option to filter displayed LSA database or advertisements to show only the AS-scope data having the specified router-ID.

Can also be filtered with the lsid option to further define the source of displayed information.

detail

Displays additional details for each LSA included in the range of displayed LSAs for any of the above options.

advertise

Displays the hexadecimal data in LSA packets (advertisements) within the OSPFv3 AS- scope on the routing switch.

The output can also be filtered by lsid and router-id.

Example output

To display link-state AS-scope link-state information, enter show ipv6 ospf3 link-state as-scope at any CLI level. When you enter this command, an output similar to the following is displayed:


Switch# show ipv6 ospf3 link-state as-scope

OSPFv3 AS Scope Link State Database

            Advertising
LSA Type    Router ID    Link State ID Age Sequence # Checksum
----------- ------------ ------------- --- ---------- ----------
As-External 15.1.1.2     0             57  0x80000037 0x0000b76b
As-External 15.1.1.2     2             945 0x80000062 0x0000b3d1
As-External 15.1.1.2     3             987 0x80000062 0x0000dfa0
As-External 15.255.155.1 1             250 0x8000006f 0x0000fae0

To display link-state AS-Scope LSA advertisements in hexadecimal format, use the advertise keyword. The following example displays output for router ID 15.1.1.2 in an AS.

show ipv6 ospf3 link-state as-scope advertise output

Switch# show ipv6 ospf3 link-state as-scope router-id 15.1.1.2 advertise

OSPFv3 AS Scope Link State Database

Raw Advertisements
------------------------------------------------------------------------
1d6e4005000000000f01010280000037b76b00280500000a400000002620000f00000000
00000000

19f64005000000020f01010280000062b3d100380700000a400000002620000b00000000
2620000a00000000000000000011000100000000

19cc4005000000030f01010280000062dfa000380700000a400000002621000e00000000
2620000a00000000000000000011000100000000