RIP interface parameters
The following table lists the VLAN interface RIP parameters and their default values.
Parameter |
Description |
Default |
---|---|---|
RIP version |
The version of the protocol that is supported on the interface. The version can be one of the following:
|
V2-only |
metric |
A numeric cost the routing switch adds to RIP routes learned on the interface. This parameter applies only to RIP routes. |
1 |
IP address |
The routes that a routing switch learns or advertises can be controlled. |
The routing switch learns and advertises all RIP routes on all RIP interfaces |
loop prevention |
The method the routing switch uses to prevent routing loops caused by advertising a route on the same interface as the one on which the routing switch learned the route:
|
Poison reverse |
receive |
Define the RIP version for incoming packets |
V2-only |
send |
Define the RIP version for outgoing packets |
V2-only |