Viewing the current instrumentation monitor configuration

The show instrumentation monitor configuration command displays the configured thresholds for monitored parameters.

Viewing the instrumentation monitor configuration

switch# show instrumentation monitor configuration

 PARAMETER                 LIMIT
 ------------------------- ---------------
 mac-address-count         1000 (med)
 ip-address-count          1000 (med)
 system-resource-usage     50 (med)
 system-delay              5 (high)
 mac-moves/min             100 (med)
 learn-discards/min        100 (med)
 ip-port-scans/min         10 (med)
 arp-requests/min          100 (low)
 login-failures/min        10 (med)
 port-auth-failures/min    10 (med)
 
SNMP trap generation for alerts: enabled
Instrumentation monitoring log : enabled

An alternate method of determining the current Instrumentation Monitor configuration is to use the show run command. However, the show run command output does not display the threshold values for each limit set.