Configuring (enabling or disabling) the TimeP mode
Enabling the TimeP mode means to configure it
for either broadcast or unicast mode. Remember to run TimeP as the
switch's time synchronization protocol, you must also select
TimeP as the time synchronization method by using the CLI timesync
command (or the menu interface Time
Sync Method parameter.
Syntax:
timesync timep
Selects TimeP as the time synchronization method.
Syntax:
ip timep {<dhcp | manual>}
Enables the selected TimeP mode.
Syntax:
[no] ip timep
Disables the TimeP mode.
Syntax:
[no] timesync
Disables the time protocol.